Spektrum SPM2800US DX10t Uživatelský manuál Strana 5

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 66
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 4
5SPEKTRUM DX10t • RADIO INSTRUCTION MANUAL
EN
5. PREOPERATION
4. THE ROLLER
• Readallsafetyprecautionsandliteraturepriortouse
ofthisproduct
• Neverallowminorstochargebatterypacks
• Neverdropchargerorbatteries
• Neverattempttochargedamagedbatteries
• Neverattempttochargeabatterypackcontaining
differenttypesofbatteries
• Neverchargeabatteryifthecablehasbeen
pinchedorshorted
• Neverallowbatteriesorbatterypackstocomeinto
contactwithmoistureatanytime
• Neverchargebatteriesinextremelyhotorcold
places(recommendedbetween50–80degreesFor
10–27degreesC)orplaceindirectsunlight
• Alwaysinspectanewbatterybeforecharging
• AlwaysterminateallprocessesandcontactHorizon
Hobbyiftheproductmalfunctions
• Alwayskeepbatteriesandchargerawayfromany
materialthatcouldbeaffectedbyheat(suchas
ceramicandtile),astheycangethot
• Alwaysendthechargingprocessifthechargeror
batterybecomeshottothetouchorstartstochange
form(swell)duringthechargeprocess
Battery and Charging Precautions and Warnings
Failure to exercise caution while using this product and comply with the following warnings could result in product malfunction,
electrical issues, excessive heat, FIRE, and ultimately injury and property damage.
Charging Your Transmitter
Before you rst power on your new transmitter, you should
charge the integrated LiPo Battery with the supplied charger.
Since the charger offers different country/regional variations,
select the front plug that is used in your country/region.
To mount the plug of your country/region, install the plug and
turn it to the right till it locks. You will nd the charging jack
of the radio under the left cover that is left from the ON/OFF
Switch. Charging will be indicated with a blue LED on front. After
switching on the radio, you will see the battery voltage graphics
and current volt.
Initial charge time of your transmitter battery is 25 hours. The
blue LED on the front of the transmitter turn off when charging
is complete.
The Roller is an important tool. Use it for scrolling down in
Menus, selecting within submenus and conrming settings. After
a short time, you will work quickly through menus and highlight
functions you wish to program or select.
Zobrazit stránku 4
1 2 3 4 5 6 7 8 9 10 ... 65 66

Komentáře k této Příručce

Žádné komentáře